The next generation of DR retrofit solutions
FDR ES II detectors are the next generation of DR retrofit solutions designed with the essential conveniences of Fujifilm image acquisition and design. Light, portable, affordable detectors can optimize your x-ray room for table and free positioning and table top exams with top-of-the-line image quality. There’s also no need to re-work your existing equipment because FDR ES II fits existing standard Buckys and holders for simple DR and DR panel retrofits. FDR ES II detectors feature 150-micron pixel pitch and a wide 16-bit dynamic range, as well as Fujifilm’s ISS (Irradiated Side Sampling) which provides ultra-sharp imaging with advanced dose efficiency. This exclusive design captures the x-ray image from the incident/patient side of the detector, in contrast to traditional designs which capture the image below the scintillator layer. The result is a reduction in the distance for light to spread, allowing the image to be captured where it’s sharper and stronger as it was always intended.
As a world-leading imaging and information company, Fujifilm is dedicated both to improving image quality and advancing dose lowering technologies and safe healthcare standards for patients. FDR ES II is a perfect example. It features engineering innovations which achieve dose efficiency improvements by as much as 30% compared to Fujifilm CR and as much as 20% over comparable DR detector designs, all while delivering exceptional images.
These lightweight, small format 10×12 detectors ideal for extremity imaging positioned outside of the bucky.
| Model | FDR ES II C25 |
| Size | 10×12 |
| External (inches) | 13 x 11 x 0.6 |
| Connection | Tethered / Wireless |
| Scintillator | Csl |
| Weight (lbs.) | 3.75 including battery |
| Pixel Matrix | 1980×1648 |
| Pixel Pitch | 150µ |
| Cycle Time (sec.) | Under 9 |
| Image Display (sec.) | 1-2 |
These lightweight, cassette-sized 14×17 detectors are available with a detachable cord and the option of going wireless for added positioning versatility.
| Model | FDR ES II C35 |
| Size | 14×17 |
| External (inches) | 15 x 18 x 0.6 |
| Connection | Tethered / Wireless |
| Scintillator | Csl |
| Weight (lbs.) | 6.4 including battery |
| Pixel Matrix | 2836 x 2336 |
| Pixel Pitch | 150µ |
| Cycle Time (sec.) | Under 9 (wired/wireless) Under 10.5 (AED wireless) |
| Image Display (sec.) | 1-2 |
These full sized 17×17 detectors are available with a detachable cord and an option to go wireless, making them ideal for dedicated use in an upright bucky or in-table solution.
| Model | FDR ES II C43 |
| Size | 17×17 |
| External (inches) | 18 x 18 x 0.6 |
| Connection | Tethered / Wireless |
| Scintillator | Csl |
| Weight (lbs.) | 8.15 including battery |
| Pixel Matrix | 2836 x 2832 |
| Pixel Pitch | 150µ |
| Cycle Time (sec.) | Under 10 (wired/wireless) Under 13 (AED wireless) |
| Image Display (sec.) | 1-2 |
Let us help you find the right product or service that will suit your needs.